When selecting high quality din 41612 type r connectors, the quality of the product is more important, if the quality is not up to standard, it will certainly not be able to be used for a long time, and it will encounter great problems in use. The quality stability of din 41612 type r connectors will bring serious harm to the personal and property safety of consumers.

First, look at the logo:

The existence of the logo is to guide consumers to the correct installation and use of the method, but also to ensure that the safety of personal property will not be harmed, of course, high quality din 41612 type r connectors should be marked in the more obvious place some important indicators. For the rated current, voltage, power, etc., need to be marked in these positions, so that consumers can ensure that they will not be used incorrectly in use.

Ii. Rating:

In order to ensure the normal use of high quality din 41612 type r connectors, people must pay attention to the rating when using, so as to ensure that the electrical device can be used safely and normally, if the actual value is greater than the rating, Then in the process of use it is likely to bring great damage to the electrical appliances, and the aviation plug can not carry such a large current and voltage.

Third, size:

The size will be related to the unity between the connector and the converter, that is to say, if the safe use can not be guaranteed in the process of use, there are corresponding technical requirements between each other, then it is likely that the size has a big problem, which will also bring hidden dangers to the user. If there is a serious accident, there is a high probability of a fire.

You must consider these three aspects when selecting high quality din 41612 type r connectors. So after learning to choose high quality din 41612 type r connectors, the problem to face is how to use it correctly, and then plug the world network to tell you:

1.high quality din 41612 type r connectors When terminating, the operator should check and work in strict accordance with the specification of the terminating, and must be terminated in accordance with the corresponding contact serial number. The thickness of the insulation layer between the selected cable wires should be matched with the distance between the contact parts, and the cable core should also be matched with the connector terminal. If the contact parts are crossed and connected, the operator should take into account the diameter of the multi-strand wire core after stranding, and it must be noted that the contact parts cannot be crossed and connected between the crimping holes.

2. When welding, the operator should first measure the diameter of the bare wire and then select the corresponding power of the soldering iron, and pay attention to the welding, each contact can not exceed 5s time, and in the process to be careful to prevent flux penetration of the insulator, otherwise it will lead to a decrease in the insulation resistance of the product.

3. When using the crimping method, note that the crimping quality can only be guaranteed when the high quality din 41612 type r connectors contact parts, wires, crimping tools and crimping procedures are accurate and controlled.

4. When the clamping is about to end, be sure to ensure that the attachment of the tail is tightened and in the end, otherwise it will be easily damaged during use.

5. When connecting the tail attachment with the anti-turn device (anti-turn key, etc.), the tail attachment should be aligned with the anti-turn device on the plug/socket, otherwise it will not be anti-turn, and serious damage will be caused to high quality din 41612 type r connectors and tail accessories.

high quality din 41612 type r connectors https://www.kujunconnector.com/TYPE-R-Connectors